Diamond floor grinding in Mallorca
Diamond discs, from coarse to fine grit, to level the floor, remove scratches and lippage and bring out the shine of the stone. On granite, marble, terrazzo, concrete and porcelain tiles, in homes and building projects all over Mallorca.
€12-25/m² in 2026
- Since 1972 in Inca
- Three generations
- Free visit and quote

In short
Diamond grinding is polishing with industrial diamond discs to correct scratches and uneven tiles and leave the floor ready for its finish. On granite it is taken down to a fine grit, because granite can't be crystallised, and on porcelain tiles it levels out lippage between tiles. In Mallorca it costs €12-20/m² in 2026 for porcelain tiles and €12-25 for granite. Projectes Sastre has been doing it since 1972, in homes and on building sites.
Why Projectes Sastre
Just the right diamond, without grinding away too much
-
01
The right grit for every stone
Excessive abrasion or an unsuitable grit can damage the floor. We adjust the grit and number of passes for each material: 3 to 4 for marble and terrazzo, and 4 to 6 for granite.
-
02
Lippage removed on new builds
If the tiling has left porcelain tiles at different heights, we level them and remove the lip without grinding down the whole tile, which would ruin it.
-
03
We'll tell you how much can be ground away
Before grinding anything, we measure how much wear layer the floor has left. With terrazzo, that's what decides it: it can take three or four polishes in its lifetime, not ten.
-
04
Our own machinery and equipment
We set out from our workshop in Inca with our own polishing machines and the discs each material needs: grinding, honing and finishing on the same job.
What is diamond floor grinding?
Diamond grinding means working the floor with a polishing machine and industrial diamond discs. First comes grinding, with a coarse grit, which takes the floor down in a controlled way to level it and remove deep scratches, water rings and lippage. Then honing: finer and finer grits until the pores are closed and the surface is even, ready for its finish.
Within polishing, diamond grinding is the corrective stage: the one that levels the floor and removes marks before the finish. People who ask us for diamond grinding usually want one of three things: to level a floor with tiles at different heights, to take granite down to a fine grit, or to get marble ready for crystallisation. The complete job, with its finish, is in floor polishing in Mallorca.
What shouldn't be confused with diamond grinding is buffing, which brings back the shine without grinding the floor down and doesn't remove scratches or water rings.

When a floor needs diamond grinding
The cases we most often encounter in Mallorca.
-
Dull or scratched granite
It can't be crystallised: its shine comes from polishing it with diamonds down to a fine grit, in 4-6 passes.
-
Porcelain tiles with lippage
On new builds and renovations, when the tiling leaves a lip between tiles: they are levelled without polishing the rest.
-
Terrazzo with uneven tiles
Grinding levels the surface and, once the joints are filled, the floor is seamless again.
-
Scratched marble
Grinding to remove the scratches and honing before crystallisation, which is what gives the mirror shine.
-
Concrete
Garages, warehouses, shops and homes: it is diamond-ground without adding layers, and can be protected with a lithium treatment.
-
Stairs and skirting boards
Treads one by one with a hand-held machine; risers and skirting boards with a diamond angle grinder.
How we diamond-grind a floor, step by step
A 100 m² home takes 2 to 4 days depending on the material: terrazzo, 2 to 3; marble and granite, 3 to 4.
- 01
Assessment
We look at the material and measure the wear and how much layer is left to grind.
- 02
Protection
Skirting boards, doors and fixed furniture, covered before we start.
- 03
Grinding
Coarse grit to level the tiles and remove deep scratches, water rings and lippage.
- 04
Joints
We fill open joints and pores, which are very common in old terrazzo.
- 05
Honing
Finer and finer grits until the surface is even and the pores are closed.
- 06
Finish
Crystallisation on marble and terrazzo, vitrification on busy floors, or the diamond's own shine on granite.
How much does diamond floor grinding cost in Mallorca?
It depends on what is being ground and what condition it's in. We'll give you the price for your floor once we've seen it.
| Service | 2026 price |
|---|---|
| Diamond grinding porcelain tiles to remove lippage between tiles | €12-20/m² |
| Granite polishing with diamond grinding down to a fine grit | €12-25/m² |
| Marble polishing, from grinding to honing | €10-25/m² |
| Terrazzo polishing | €10-20/m² |
| Fine diamond grinding added to marble polishing | +€3-6/m² |
Guide prices for 2026. Stairs, worktops and skirting boards are worked by hand and quoted separately. For complete projects and developments we give a fixed price per project.
What people ask us
Frequently asked questions about diamond floor grinding
Any other questions? Tell us what kind of floor you have and we'll get back to you, with no obligation.
WhatsAppWhat is the difference between diamond grinding and polishing?
Diamond grinding is the corrective part of polishing: with industrial diamond discs it removes scratches and unevenness and leaves the floor ready for its finish. We call it polishing when it's the complete job on worn marble or terrazzo, finished with crystallisation or vitrification; diamond grinding, when the main task is correcting: levelling lippage or taking granite down to a fine grit.
Can a porcelain tile floor be diamond-ground?
Yes, to remove the lippage left by poor tiling: it is ground just enough to level the tiles with each other. What we don't do is polish the whole porcelain surface as if it were stone, because it comes finished from the factory. In 2026 it costs €12-20/m² and is quoted separately from polishing.
How much does diamond floor grinding cost?
Removing lippage from porcelain tiles costs €12-20/m² in 2026, and polishing granite with diamond grinding down to a fine grit, €12-25. Marble is €10-25/m², and fine diamond grinding added to its polishing adds another €3-6. Stairs and skirting boards are quoted separately, because they are worked by hand.
Does diamond grinding damage the floor?
Not if it's done properly: it takes off a thin layer in a controlled way. What you have to watch is not going too far. Terrazzo has about 5 to 8 millimetres of layer above the coarse aggregate and each polish uses one or two, so it can take three or four polishes in its lifetime. Granite, solid stone all the way through, can take many more.
Does diamond grinding remove stains?
Yes, most of them: surface and ingrained stains go with the layer that's ground away. Those that have soaked deep in, like very old oil, may fade rather than disappear. On the visit we look at each stain and tell you what to expect.
Is there a lot of dust when a floor is diamond-ground?
It doesn't stay in your home: we work with equipment that collects the water and dust, room by room, so you can keep living there. What there is, is noise during working hours. We explain it in how we polish floors without dust.
Our work, your best guarantee
Does your floor need diamond grinding?
We'll come and see it, tell you which grit and how many passes it needs and give you a price, with a free visit. If you're a builder or renovation company, we work to your project's dates.
- 971 50 39 36
- info@projectessastre.com
- C/ General Weyler, 29, 07300 Inca (Mallorca)
- Monday to Friday, 8:30 am to 4 pm